Fluke 810 User Manual page 36

810
Users Manual
Table 3-1. Front Panel
Item Control
Turns the Tester on or off.
 
Shows the Machine Setup options:
Set up new Machine, Copy Machine
 
Setup, Change a Machine Setup
Shows the Machine Setups
available for measurement. After the

selection of a Machine Setup,

continue with the measurement
screens.
Shows the completed Machine
Setups with measurements that are

available for diagnosis. After a

measurement, push to see the
diagnosis screen.
Saves the parameters for the Tester


settings and Machine Setups.
3-4
Description
Table 3-1. Front Panel (cont.)
Item Control
Shows the Machine Setups and


diagnoses in Tester memory.
From the Startup screen, shows the

Help menu. For other screens,

shows Help for the current screen.
Shows the Self Test, Settings, and


Clear Memory functions.
Turn the Dial to move the cursor
highlight on the screen. Push the
Dial

center of the Dial (Enter) to make
the selection.
Softkeys  through 
Softkeys make the selections that show on

the screen above each softkey.
Description