Annex B System Water Additives - A.O. Smith Upsilon Installation And Service Manual

Annex B
When the filling water requirements as referred to in chapter Water Quality have been met, certain additives are allo-
wed for the below mentioned applications and related dosage. Warranty on A.O.Smith delivered installation products
expires, if these additives and concentrations are not used in accordance with this annex.
Additive type
Corrosion inhibitors
Anti-freeze
System cleaners
System water additives
Supplier and specifications
Sentinel X100 Corrosion resistant
protection agent of CH systems
Kiwa certified
Fernox F1 Protector Corrosion
resistant protection agent of CH
systems
Kiwa certified KIWA-ATA K62581,
Belgaqua certified Cat III
Kalsbeek
Monopropyleneglycol / propane-
1,2-diol
+ inhibitors
AKWA-Colpro KIWA-ATA
2104/1
Tyfocor L
Monopropyleneglycol / propane-
1,2-diol
+ inhibitors
Sentinel X500
Monopropyleneglycol + inhibitors
Kiwa certified
Fernox Alphi 11
Monopropyleneglycol + inhibitors
Kiwa certified KIWA-ATA K62581,
Belgaqua certified Cat III
Sentinel X300
Solution of phosphate, organic he-
terocyclic compounds, polymers
and organic bases
Kiwa certified
Sentinel X400
Solution of synthetic organic poly-
mers
Sentinel X800 Jetflo
Aqueous emulsion of dispersants,
moistening agents and inhibitors
Max. concentration
1-2 l/100 litres CH water content
500 ml can or 265 ml Express /
100 litres CH water content
50% w/w
Nr.
50% w/w
20-50% w/w
25-50% w/w
1 litre / 100 litres
1-2 litres / 100 litres
1-2 litres / 100 litres
Application
Aqueous solution of organic and
inorganic agents preventing corro-
sion and scale forming
Preventing corrosion and scale
forming
Anti-freeze
Anti-freeze
Anti-freeze
Anti-freeze in combination with F1
Protector
For new CH installations Removes
oils/grease and flow control agents
For cleaning existing CH-installati-
ons Removes sediments.
For cleaning new and existing CH-
installations Removes iron and
lime-related sediments.
61