Siemens Simatic S7-1500 Manual page 12

Product overview
2.1 Properties
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Module-internal Shared Output (MSO)
Configurable after interface module
IM 155-5 DP ST
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following components are supplied with the module and can also be ordered separately
as spare parts:
● Labeling strips
● U connector
● Universal front door
Other components
The following component can be ordered separately:
Front connectors, including potential jumpers and cable ties
You can find additional information on accessories in the system manual S7-1500/ET 200MP
(https://support.industry.siemens.com/cs/ww/en/view/59191792).
12
Firmware version of
the module
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V2.0.0 or higher V13 Update 3 or higher
(PROFINET IO only)
V2.0.0 or higher
Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0)
Configuration software
STEP 7
(TIA Portal) (TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
V12 or higher
V12 or higher
V12 or higher
V13 or higher
Manual, 09/2016, A5E03485733-AD
GSD file in STEP 7
--- / X
X
X
X
(PROFINET IO only)
X