Supra SL Owner's Manual page 65

Optional Mooring Cover
Your Supra boat cover is made from the finest material and
webbing to ensure that your boat will be protected in the off
season. The cover has been designed to fit securely around
each boat.
64
Use the following procedure when covering the boat:
1. Be sure that the cover fits snugly at the bow then unfold
from front to back.
2. Be sure to install cover pole(s) and adjust to proper
height. This will keep water from gathering in the center,
which can damage the cover.
3. Use the ratchet system to tighten the drawstrap.
4. Loop the Taps 2 system over the tower pylon and
pull the rope tight.
Folding Cover
When folding the cover for storage, be sure the cover is dry.
Take care not to scratch the canvas finish against rough
surfaces. Store in a dry location.
Cover Repair
If the cover becomes damaged, immediately patch and
reseal the area. Use a tent seam sealer to reseal any new
stitches. Spray fabric guard on scraped or worn surfaces.
Tears should be repaired professionally and stitches sealed
to prevent leakage.
DO NOT trailer the boat with the mooring cover
installed. This type of damage IS NOT covered by your
boat warranty!
©2017 Skier's Choice, Inc.