Mitsubishi FX3U Series User Manual page 100

FX Series Programmable Controllers
3U
User's Manual - MODBUS Serial Communication Edition
4) When processing restart communications option:
The slave (FX-Series MODBUS Communication ADP) stores this kind of event to the communications
event log when processing the restart communications option.
00H is stored to the communications event log.
5) Clearing the communications event log
The communications event log can be cleared by either of the following:
Clear setting of the communications event log with the restart communications
option (Refer to Subsection 7.11.2).
Power OFF
96
b7 b6 b5 b4 b3 b2 b1 b0
0
0
→
ON or PLC state is turned from OFF
0 0 0 0 0 0
→
ON.
9 Slave Specification
9.5 Communication Event log