Sharp AL-1552 Service Manual page 4

2. Duplex motor section (Duplex model only)
A. Remove the rear cabinet.
1) Remove four screws.
2) Remove the rear cabinet.
B. Remove the main PWB.
1) Disconnect each connector.
2) Remove four screws, and remove the MCU PWB.
3)
3) Disconnect the connector.
4) Remove five screws, and remove the I/F PWB.
1)
1)
1)
2)
1)
1)
1)
1)
1)
1)
2)
1)
AL-1552/AL-1553 DUPLEX-RELATED ITEMS
C. Remove the Duplex motor.
1) Remove two screws.
2) Remove the Duplex motor cover.
3) Remove the Duplex motor.
Note: When reassembling, be sure to engage the Duplex motor gear
with the belt on the main body side.
2)
3. Reverse roller section (Duplex model only)
A. Remove the reverse unit.
1) Remove four screws.
2) Remove the spring, and the earth wire.
2)
3) Remove the reverse unit.
2)
2) 2
1
B. Remove the reverse roller.
1) Bend the reverse roller and remove it.
1 – 3
3
1
3
1
1
2