Washing - Bosch WAS32794ME Instruction Manual

Load indicator/rec-
e To activate, first open the door, set the programme
ommended dosage
and then load the items of laundry.
page 9.
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load –> page 7.
Observe the important information –> page 9.
Detergents and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Models without insert for liquid detergent:
our liquid detergent into the appropriate dispenser and place in the drum.
During operation: open the detergent drawer carefully.
Dilute thick fabric softener and care products with water.
This prevents blockages.
Open the door/set the programme
**If the childlock is active –> deactivate it, page 5.
Follow the instructions in the display panel.
Loading the laundry
selector Start/
Reload
Adding detergent and
selector for
he machine on Make individual settings
for selecting
> page 5.
–
mme. Can be
Stain selection
ther direction.
Select the temperature/
spin speed –> page 2.
Sorting the laundry
Measure accordingly:
1
2
Observe the load indicator in
the display –> page 9
3
care products
Observe the dosage
recommendation for detergent
in the display –> page 9
4
Close the

washing

machine door
5
> page 6.
–
Washing
Detergent drawer
with compartments I, II,
Washingmachinedoor
Controlpanel
Washing machine door
handle
Serviceflap
Washing
Select Start/Reload
3
Switching off
Turn the programme selector to off.
Turning the tap off
Not required for Aqua-Stop models –> Installation
instructions, page 7.
Removing washing
Open the washing machine door and remove the
washing.
If Rinse stop (no final spin) is active: turn the
programme selector to Empty or
spin speed if necessary.
Press Start/Reload.
– Remove any foreign objects -
risk of rusting.
– Leave the washing machine door and
detergent drawer open so that any residual
water can evaporate.
Programme has ended when...
... finished, Remove washing appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: select Rinse.
– Press Start/Reload.
Programmes at low temperatures:
6
– Select Spin or Empty.
– Press Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press Start/Reload). The new programme starts
from the beginning.
Reloading laundry, if ...
... Start/Reload is selected and Top-up possible
appears in the display panel.
– Do not leave the washing machine door open
for too long as water from the washing could
leak out.
– Load indicator not active when reloading.
Press Start/Reload.
Spin. Select the
–> page 6
4