Related Manuals for Escort Thermo Check for Windows 1.6
Summary of Contents for Escort Thermo Check for Windows 1.6
- Page 1 Windows Windows Windows Windows USER MANUAL USER MANUAL USER MANUAL USER MANUAL Revision 1.6 Copyright © 2000-2004 Escort Data Logging Systems Ltd.
- Page 2 Page ii...
-
Page 3: Table Of Contents
Contents Introduction Getting Started ThermoCheck Keypad Overview What You Will Need, to Use the Software Installing the Software Navigating the Software Configuration Options Connection Battery Replacement Setting Up a Database Products Processes or Locations Database Orientation Database Item Order Product Specifications, Alarms and Delays Templates Uploading a Database Command Summary... - Page 4 Page iv...
-
Page 5: Introduction
Introduction The ThermoCheck is a portable, handheld temperature meter and temperature measurement storage device that facilitates the validation of quality control specifications for temperatures of products at various stages of production and storage. Product descriptions and process/location descriptions can be stored in a database within the unit. Maximum and minimum temperature specifications for each process/location of products are stored in the database. - Page 6 To use the ThermoCheck you will need to install the ThermoCheck software (please refer to Chapter 2, Installing the Software for more information about installing the software) onto a computer so that a ThermoCheck can be configured. To configure a ThermoCheck so that it will be able to take readings a Database will need to be uploaded in to the ThermoCheck (please refer to Chapter 3, Setting Up a Database for further information about creating and uploading a Database to a ThermoCheck).
-
Page 7: Getting Started
Getting Started To use the ThermoCheck to record temperature readings, the unit will need a database configured, linking products, process/location and product specifications. You can configure a database in the unit with the user software. To turn on the ThermoCheck press any key on the ThermoCheck's Keypad. Additionally, the connection of external power, and connection to a computer's serial port will turn the ThermoCheck ThermoCheck Keypad Overview ThermoCheck Keypad... - Page 8 Turns the ThermoCheck off (unless the ThermoCheck is currently off, in which case pressing any button will turn the ThermoCheck on). Instructs the ThermoCheck to record a reading for the currently selected product STORE at the currently selected process/location “ENTER” Selects the current item (product, process / location or setup option) on the display.
-
Page 9: What You Will Need, To Use The Software
What You Will Need, to Use the Software Installation of the software requires 9.4 megabytes of free disk space, plus an additional 5.8 megabytes of free hard disk space during the installation process. In order to use the ThermoCheck for Windows software, you will need an IBM-compatible PC with at least one free serial communications (COM) port, a 386, or better, processor and at least 8 megabytes of memory, running the Windows... -
Page 10: Navigating The Software
Navigating the Software When the software starts, there are five items on the menu bar. These five menus will give you access to the various functions of the software: File Allows opening, saving, closing and printing of ThermoCheck data reading files and opening and saving of database configuration files. -
Page 11: Configuration Options
Configuration Options It is recommended that you first configure the software to ensure that the communications port that the ThermoCheck is connected to matches the communications port that the software communicates with. The default is the first serial communications port, COM1. You can change the communications port setting by selecting Options from the Edit menu. -
Page 12: Connection
Connection To get the ThermoCheck to successfully communicate with the software, you will need to connect the interface cable to a serial communications port on your PC. If you select Get Database from the ThermoCheck menu, you will see a progress bar at the bottom of the program window, indicating how far through the process the software is. -
Page 13: Battery Replacement
Battery Replacement Your ThermoCheck requires two (2) AA batteries to operate. You can use either alkaline or re- chargeable (for example, NiCd or NiMH) batteries, however please remember that you must NEVER attempt to charge alkaline batteries. To insert the batteries: 1. -
Page 14: Setting Up A Database
Setting Up a Database In order to use the ThermoCheck, you need to create a product database. Databases link individual products with the processes/locations of their production at which you may want to monitor temperature. In addition, you can define upper and lower specification limits and alarm conditions, at each of the processes/locations involved in a product’s production, to match quality control specifications. -
Page 15: Products
The database window has panel buttons for products, processes/locations, users, and the ThermoCheck’s settings. When you click on each one of these panel buttons, you will be able to change the settings for that category in the panel that is revealed. Note that you can select a product, process/location, or user in the Products, Processes/Locations or Users panels by either: •... -
Page 16: Processes Or Locations
All product names must start with a capital letter and the software will ensure that each product does start with a capital letter. Product names can not be blank (empty) and therefore the software will ensure that no products are created without a valid name. The Products panel lists products, displaying each product’s available processes/locations in a list under the product name. - Page 17 Process/Locations Panel in the Database Window You can expand the list of processes/locations to show the different products under each process/location: • by pressing [+] when the process/location you want to expand is selected, • or by left clicking with the mouse on the plus symbol beside the process/location name. As with the products panel, you can hide a list of products under a process/location, if it is visible, by clicking on the minus symbol beside the process/location name.
- Page 18 You can change a product or process/location name by: • typing the new name directly into the appropriate field on the left, • selecting the current name, clicking on it with the mouse, and typing the new name, • or pressing [F2] when a product or process/location is selected, and typing the new name. When you are editing a product or process/location name, and you wish to revert back to the original name, you can press [Esc], and the original name will be restored.
-
Page 19: Database Orientation
Database Orientation In addition to entering product and process/location details, the software allows you to specify whether the database is to be primarily oriented around products, or processes/locations. This setting determines whether the operator of the ThermoCheck chooses the product first, and then the process/location, or alternatively, the process/location and then the product. -
Page 20: Database Item Order
Database Item Order The software allows you to: • manually define the order of each of the items in the database, or • have the database items automatically sorted in alphabetical order. These options are controlled via the Manual Order checkbox in the Products and Processes/Locations panels. - Page 21 To move a product up or down within the list of products: Ensure that the products panel is currently displayed and the Product first button is down. Ensure that manual order is enabled, by checking Manual Order. Select the product you wish to move. Move the product to the desired position by: •...
-
Page 22: Product Specifications, Alarms And Delays
Product Specifications, Alarms and Delays You can enter specification limits for each of the products you have defined, at each critical process/location, in either the Products panel, or the Processes/Locations panel. specification is the maximum allowable temperature for a product at a given process/location, and a lower specification is the lowest allowable temperature at the given process/location. -
Page 23: Templates
Templates When you have set up a database, you can also save it to a Template file, for future use. To do this, select Save or Save As from the File menu. Type in the name of the file you want to save the template database as, and click Save. -
Page 24: Command Summary
Command Summary Below follows a summary of useful commands available for setting up and editing a product and process/location database. The keyboard shortcuts for menu items are included. Products Panel [Left-mouseclick] Selects a product or process/location. [Ctrl-P], [Ctrl-N] Adds a new product. [Ctrl-L] Adds a new process/location. - Page 25 Processes/Locations Panel [Left-mouseclick] Selects a product or process/location. [Ctrl-L], [Ctrl-N] Adds a new process/location. [Ctrl-P] Adds a new product. [Insert] If there is no selection, or a process/location is selected, a new process/location will be added. [Insert] If a product is currently selected, a new product to the current process/location will be added.
-
Page 26: Setting Up Corrective Actions
Setting Up Corrective Actions Introduction Corrective actions are used to prompt the user to perform certain actions when the readings to be stored are not within specification and records which action the user has selected to perform. Creating Corrective Actions To include corrective actions for various products, first add the corrective action meanings to the “Corrective Action”... -
Page 27: Assigning Corrective Actions
Corrective Actions Panel in the Database Window Assigning Corrective Actions Once you have created the corrective actions to be assigned to various products, select the Products panel or the Processes/Locations panel. Select the product and process/location that you want to assign one or more corrective actions to and you will notice that now the corrective actions are listed in the corrective actions list box for each item. -
Page 28: Command Summary
Assigning Corrective Actions to Database items Command Summary [Left-mouseclick] Selects a corrective action. [Ctrl-R] Adds a corrective action. [Insert] If there is no selection, or a corrective action is selected, a new corrective action will be added. [Delete] If a corrective action is currently selected, then this selected corrective action will be deleted. -
Page 29: Setting Up A User List
Setting Up a User List Setting the ThermoCheck up to include user information is optional. The advantage of setting up a user list in the unit is that reading information stored in the ThermoCheck will also include the name of the user who performed each reading. When a user list is defined in the unit, a user must be logged on before any readings can be taken. -
Page 30: Adding And Removing Users
Users Panel in the Database Window Adding and Removing Users The method for adding users is much the same as that for adding products or processes/locations. You press the [Insert] key in the Users panel, and then type the name (or other descriptive text) of the user. -
Page 31: User Options
User Options When a user is selected, their password and PIN code are shown in the panel next to the user list. For security and privacy reasons, PIN codes and passwords are displayed as a series of asterisks. The PIN code identifies the user currently operating the ThermoCheck. Therefore PIN codes must be unique to each user and no two users may have the same PIN code. -
Page 32: Command Summary
Command Summary [Left-mouseclick] Selects a user. [Ctrl-U] Adds a new user. [Insert] If there is no selection, or a user is selected, a new user will be added. [Delete] If a user is currently selected, then this selected user will be deleted. [F2] Allows the name of a selected user to be changed. -
Page 33: Customising The Thermocheck
Customising the ThermoCheck Customising With the Software If you click the Settings button in the database window, the configuration settings panel will become visible. Any changes you make to these settings will not take effect until the database is uploaded to the ThermoCheck. - Page 34 General Information This box displays general information about the ThermoCheck, including the serial number, product code and battery status. Note that the serial number, product code and battery status will only be displayed if the database was downloaded from a ThermoCheck. You can also type in a description here, which will be displayed at the top of the screen when the unit is powered up (once the database has been uploaded to the ThermoCheck).
- Page 35 Date and Time You can adjust the ThermoCheck’s internal time clock with the options in this box. If you click Match computer date and time, the unit’s time clock will be set to match your PC’s internal clock. Note that this will only occur if the settings are uploaded to the unit (with the Set Database command). Select the No change option if you do not want to have the ThermoCheck’s clock updated.
-
Page 36: Customising Without Using The Software
Customising Without Using the Software If you press the SETUP key when the unit is turned on, the current state of the configuration options will be shown on the display. This setup screen gives access to some of the options available in the Configuration Settings panel of the database window of the software. -
Page 37: Using The Thermocheck
Using the ThermoCheck Using the ThermoCheck for the First Time If your ThermoCheck is turned off, you can turn it on by pressing any key on the keypad, or by attaching external power, or by connecting a computer. When a ThermoCheck is powered up, the battery voltage, along with the firmware version, will be shown on the display. - Page 38 been installed in the unit, a user will need to log on before a reading can be recorded (see Logging On and Logging Off below). The database orientation affects the process of selection of products and processes/locations for recording readings. If the database process/location oriented, a process/location (the primary key) is selected first and then a product under that process/location (the secondary key) is selected before a reading is taken.
-
Page 39: Taking And Storing A Temperature Reading
Once you have made a selection of a product and a process/location, the screen will display: • the currently selected product and process/location, • the current date and time, • the current reading of the temperature probe, • and, if a user list is installed in the unit, the current user’s name. If at this stage you want to select a different secondary item, under the current primary item, you can do so with the left and right arrow keys. -
Page 40: Logging On And Logging Off
Logging On and Logging Off If there is a user list installed in the unit, you will need to log on to identify yourself before a reading can be taken. If no users are currently logged on, you can do this by pressing the key or key, which will bring up the log-on screen. -
Page 41: Accessing Data Stored In The Thermocheck
Accessing Data Stored in the ThermoCheck Downloading Readings To download the reading information stored in the unit, select Get Readings from the ThermoCheck menu. If users are defined in the unit, you will be prompted to enter a username and password. If the user name and the password are valid, the reading information will be downloaded from the ThermoCheck. -
Page 42: Graphing Readings
At the top of the list window is a menu, which allows you to specify how data is grouped. There are five options: View ungrouped Group by Product Group by Process/Location Group by User Group by Year:Month Graphing Readings You can create a graph of the readings with the Graph button at the top of the list window (next to the grouping menu). -
Page 43: Printing Readings
At the top of the graph window there are three buttons, which allow you to control whether out of specification readings are shown on the graph: • the button with the red arrow determines whether above-specification readings are included: if it is down, above-specification readings will be shown on the graph; if it is up, they will not be displayed. -
Page 44: Saving Readings To A File
If the topmost data window is a list, the Print dialog will be launched, allowing you to specify exactly what data you want to print, and how to print it. The options available in the Print dialog box are: • If there are multiple printers available on your PC, you can choose from available printers with the drop down Printer menu.