3.3.5 Removing the loading assembly and traverse mechanism assembly
(See fig.9 and 10)
• Remove the MD servo control board, mecha cover, head lifter
and head assembly.
(1) Remove the three screws D attaching the loading assem-
bly from upper side of main body. (See fig.9)
(2) Shift the loading assembly to front side, and then discon-
nect the fixing part f of traverse mechanism assembly.
(See fig.9)
(3) Remove the loading assembly to upper side, and then re-
move the traverse mechanism from the single flame. (See
fig.10)
1-30 (No.MB496)
D
Fixing part f
Fig.9
Loading assembly
Traverse mechanism assembly
Fig.10
D
Loading assembly
D
Single frame