3.1.4 Removing the front panel assembly
(See Figs.6 to 8)
• Remove the rear cover(B), side panels(L)/(R) and top cover
assembly.
(1) From the left side of the main body, disconnect the card
wires from the connectors (CN702, CN710) on the micon
board. (See Fig.6.)
(2) From the both sides and bottom sides of the main body, re-
lease the joints b and joint c. (See Figs.6 to 8.)
(3) Remove the front panel assembly in the direction of the ar-
row. (See Fig 8.)
Front panel assembly
b
CN710
Micon board
Fig.6
Front panel assembly
b
Fig.7
c
Front panel assembly
Fig.8
CN702
(No.MB496)1-11