Getting Started - Adcom luna Owner's Manual

Getting Started

Carefully remove your speaker from the box. You may
wish to store the packaging for future use.
What you can find inside of your package
Main unit
Power adapter
Remote control
Sling
Screw driver
Peg (male + female)
Plastic spacer x 1 + Screw (30mm) x 1
Instruction manual
Positioning your Speaker
You can place your speaker on the table or hang on the
wall.
Placing your speaker on the table:
Pick the speaker from package and then put on a flat /
stable surface that is not subject to vibrations.
Hanging your speaker on the wall:
1) Drill a hole in the wall and insert the Plastic spacer
(A) to the hole.
2) Hold Peg (B) on the wall and make the hole to hole,
and then insert Screw (C) into Peg (B) and screw
in the wall by using Screw driver (D) to fix Peg (B)
firmly.
3) Screw Peg (E) onto Peg (B).