Table of Contents
Advertisement
8.
Tap 'Skip checking'.
9.
The
WiFi indicator will light white once your
speaker connected to network.
Tap 'Start using my audio system' to find your speaker
in the list. Make sure your smart phone connect to the
same WiFi network as the speaker.
Select "ADCOM-Luna xxxxxxxxxxxx" (the 12 digit
alphanumeric code is the MAC address of your
speaker) from list, now playing screen will show.
Note: if you desire changing to use another WiFi
network, press and hold MODE button on the unit
for about 10 seconds to do a factory reset.
Speaker will restart and reset to initial status and
you can set the network again.
10. For initial use, you need to tap SOURCE tab to select
a play mode.
Advertisement
Table of Contents
