Connecting The Color Processor And Other Input Sources To Your Tv; Using Video Cameras With The Color Processor - Radio Shack ARCHER 15-1275 Owner's Manual

Connecting the Color Processor and
Other Input Sources to Your TV
If you want to use a regular TV as a monitor for the Color Processor signal,
there must be an RF modulator (as in a VCR or enhancer/stabilizer unit) in
between, as shown below. When using your TV as a monitor, you may also
have easy access to other input sources, such as cable TV or a TV antenna, by
using a video A/B switch or video selector (available from Radio Shack).

Using Video Cameras with the Color Processor

You may use a video camera in place of the source VCR in any of the
suggested connections. This will allow you to improve the picture's colors as
the original recording is being made. You must use RCA-type phono connectors
for the inputs to the Color Processor. A camera AC power supply that provides
power for the camera and has the necessary RCA-type audio and video outputs
will be needed.
10