Lexus CT200h Owner's Manual page 59

■
AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* Power" to on. (P.62)
®
Leave the Bluetooth device in a loca-
tion where the connection can be estab-
lished.
 When the power switch is in ACCES-
SORY or ON mode, the system searches
for a nearby registered device.
 The system will connect with the registered
device that was last connected, if it is
nearby.
■ CONNECTING MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
Press the "MENU" button on the
Remote Touch and select "Setup".
2
Select "Bluetooth*".
3
Follow the steps in "CONNECTING A
®
Bluetooth DEVICE" from "STEP 2".
(P.58)
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
■ RECONNECTING THE Bluetooth
PHONE
If a Bluetooth
due to poor reception from the
®
Bluetooth
switch is in ACCESSORY or ON
mode, the system automatically recon-
nects the Bluetooth
 If a Bluetooth
purpose, such as turning it off, this does not
happen. Reconnect the Bluetooth
manually.
®
man-
CT200h_Navi_OM76112U_(U)
15.02.27 09:44
2. Bluetooth® SETTINGS
®
phone is disconnected
network when the power
®
phone.
®
phone is disconnected on
®
phone
®
2
59