Rmoving The Switch / Micon Board - JVC HX-Z10 Service Manual

3.1.13 Rmoving the switch / micon board

(See Fig.27~29)
• Prior to performing the following procedure, disconnect the
card wire from CN43 on the micon board.
(1) Disconnect the card wire from connector
con board.
(2) Remove the fifteen screws S attaching the switch / micon
board.
(3) Remove the spacer fixing the wire.
(4) Move the switch /micon board in the direction of the arrow
to disconnect the wire from connector
on the micon board.
CN840 on the mi-
CN880 and CN900
S
S
CN43
S
Fig.27
Switch board
Spacer
Fig.28
Switch board
CN880 CN840
CN43
Fig.29
Switch board
Spacer
S
Micon board
CN840
CN900
Micon board
(No.MB014)1-15