Dusk Simulation Function; Display Brightness Function; Cleaning And Maintenance - Philips HF3480 User Manual

Dusk simulation function

Select the dusk simulation function if you want the light and/or the sound
of the Wake-up Light to stay on and dim gradually during a set period of
time (15 minutes to 2 hours) before you go to sleep. The lamp and/or
sound switch off automatically after the set time.
1 Follow steps 1 to 5 in section 'Middle dial' in this chapter to select
the dusk simulation function and to set the dusk simulation time.
Note: You can choose a time from 15 to 120 minutes (15, 30, 60, 90 or 120
minutes).
After the set time, no matter whether the light and/or the radio
,
are on, the appliance switches off both light and sound.

Display brightness function

Select the display brightness function if you want to adjust the brightness
of the display.
1 Follow steps 1 to 5 in section 'Middle dial' in this chapter to select
the display brightness function and to set the display brightness.
You can choose a display brightness from 1 to 4.

Cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Regularly remove dust from the outside of the appliance with a dry
cloth.
1 Unplug the appliance before you clean it.
2 Clean the outside of the appliance with a dry cloth.
Do not let water run into the appliance or spill water onto the
appliance (Fig. 23).
EnglisH
15