How To Operate The Tuner; Tuning To A Station; Preset Station Scan - Eclipse CD5030 Reference Manual

Hide thumbs Also See for CD5030:
Table of Contents

Advertisement

Available languages

Available languages

How to operate the tuner

ATTENTION
If stations have been stored in the memory, pressing a button from [1] to [6] will enable you to select a station. (For
details, refer to "Manually storing stations into memory" on page 7.)

Tuning to a station

There are both automatic and manual methods (one of each) for storing stations in memory. The main unit
can store up to 24 stations in memory.
There are 6 stations for AM and 18 stations for FM (6 each for FM1, FM2 and FM3) (initial settings).
1
Press the [
/BAND] button briefl y
(for less than one second) to switch
to the desired FM or AM band.
Radio bands will switch from FM1 → FM2 →
FM3 → AM in order each time the button is
pressed.
2
Press the [
] button or the [
button to tune to a station.
[
] :
Tunes to higher frequencies.
[
] :
Tunes to lower frequencies.

Preset station scan

This function enables reception of all the stations in the preset buttons for fi ve seconds each.
1
Press the [▼] button for more than one second.
"P SCAN" will appear on the display, and
stations stored under preset buttons [1] through
[6] will be played for fi ve seconds each.
6
How to operate the tuner
English
3
Press and hold the [
the [
] button. The device starts
to search for stations automatically.
[
] :
Starts searching toward higher frequencies.
[
] :
Starts searching toward lower frequencies.
]
ATTENTION
ATTENTION
At times, it may be diffi cult to maintain optimum reception
At times, it may be diffi cult to maintain optimum reception
because the antenna attached to your vehicle is constantly
because the antenna attached to your vehicle is constantly
in motion (relative to the broadcast antenna), encountering
in motion (relative to the broadcast antenna), encountering
continuous variation in the strength of the radio signals
continuous variation in the strength of the radio signals
received. Other factors affecting reception include
received. Other factors affecting reception include
interference from natural obstacles, buildings, etc.
interference from natural obstacles, buildings, etc.
Digital broadcasts are available when an optional HD
Digital broadcasts are available when an optional HD
Radio tuner unit is connected.(U.S.A. only)
Radio tuner unit is connected.(U.S.A. only)
2
W h e n y o u r d e s i r e d s t a t i o n i s
displayed, press the [▼] button again.
The main unit will stay tuned to the desired
station.
] button or

Advertisement

Table of Contents
loading

Table of Contents