Table of Contents
Advertisement
UX-B800A
[4] Transmittable documents
1. Document Sizes
Normal size
Width
Length
(Max.)
A4 size
(Min.)
140mm
70mm
210mm
[Special size]
[Normal size]
Use document carrier sheet for smaller documents.
•
With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
10 sheets
Paper weight
20 lbs.
(74.3 g/m
at the environment
23 ± 5°C
55 ± 10%
Paper thickness (ref.)
0.09 mm
Paper size
A4 (210 mm x 297 mm)
Feeder capacity
A4: 10 sheets max.
3. Document Types
•
Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain
pen, ball-point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine
can also be transmitted.
•
Diazo copy (blue print)
•
Diazo copy documents of a normal contrast may be transmitted.
•
Carbon copy
A carbon copy may be transmitted if its contrast is normal.
4. Cautions on Transmitting Documents
•
Documents written in yellow, greenish yellow, or light blue ink can-
not be transmitted.
•
Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
•
All clips, staples and pins must be removed from documents before
transmission.
•
Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
•
All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
148 - 210 mm
140 - 297 mm
(Max.)
356mm
297mm
210mm
[Special size]
1 sheet (Manual)
14 lbs. ~ 42 lbs.
2)
2
(52 g/m
~ 157g/m
0.06 mm ~ 0.18mm
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at as follows:
Normal size: max. ADF 20 pages
•
Temperature: 18 ~ 28°C
•
Humidity: 45 ~ 65%
Special size: single sheet only (manual feed)
NOTE
•
When you need to send or copy more pages than the feeder
limit, place additional pages in feeder when last page in feeder is
being scanned.
•
Place additional pages carefully and gently in feeder. If force is
used, double-feeding or a document jam may result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
•
Readable width
208mm, max
2
)
•
Readable length
This is the length of the document sent minus 4mm from the top
and bottom edges.
1 – 5
Readable width
4mm
Readable length
4mm
Advertisement
Chapters
Table of Contents
