Vivotek SD9365-EHL User Manual page 316

delpos <Text string less than
40 characters>
return <return page>
8.11 IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax: <product dependent>
http://<servername>/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=<ipaddress>[&index=<value>][&ret
urn=<return page>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=<return page>]
PARAMETER VALUE
type NULL
allow, deny
method addv4
addv6
delv4
delv6
ip <IP address>
index <value>
return <return page>
Delete preset location from the preset list.
Redirect to the page <return page> after the parameter is assigned.
The <return page> should be the relative path according to the root of
camera. If you omit this parameter, it will redirect to an empty page.
* If the <return page> is invalid path, it will ignore this parameter.
DESCRIPTION
Get IP filter type
Set IP filter type
Add IPv4 address into access list.
Add IPv6 address into access list.
Delete IPv4 address from access list.
Delete IPv6 address from access list.
Single address: <IP address>
Network address: <IP address / network mask>
Range address:<start IP address - end IP address>
The start position to add or to delete.
Redirect to the page <return page> after the parameter is assigned.
The <return page> should be the relative path according to the root
of camera. If you omit this parameter, it will redirect to an empty
page.
* If the <return page> is invalid path, it will ignore this parameter.
VIVOTEK
User's Manual - 316