Event Setting - Vivotek MS8391-EV User Manual

7.26 Event setting

Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
di
vi
VALUE DEFAULT
string[40] NULL
0, 1 0
0, 1, 2 1
1~999 10
boot, boot
di,
pir,
motion,
seq,
recnotify,
tampering,
vi,
volalarm,
vadp
String[40] trigger
0, 1 1
0~7 0
URL Command Document for All Series391
SECURITY DESCRIPTION
(get/set)
6/6 Identification of this entry.
6/6 Enable or disable this event.
6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
6/6 Delay in seconds before detecting the
next event.
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"pir"= PIR detection
"motion" = Video motion detection
"seq" = Periodic condition
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger)
"volalarm" = Audio detection.
"vadp" = VADP trigger
6/6 The status for event trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input.
The LSB indicates DI 0.
6/6 Indicate the source id of vi trigger.
This field is required when trigger
condition is "vi".
One bit represents one digital input.
The LSB indicates VI 0.
60
VIVOTEK
User's Manual - 195