Care And Daily Cleaning - Bosch MSM14...GB Instruction Manual

en
Care and daily cleaning
Attention!
■ The blender foot must be securely
connected to the base unit. The blender
foot must not wobble or fall over.
■ We recommend that the appliance is not
switched on for longer than is necessary
to process the ingredients.
■ Solid foods such as apples, potatoes
and fish must be cut up and soft cooked
prior to processing. Use the universal
cutter for cutting/chopping raw food
(onions, garlic, herbs, etc.).
X Fig. B
1. Prepare the desired food. Cut up large
pieces in advance.
2. Place the food in a suitable, tall and
stable receptacle or continue processing
the food in the cooking pot.
3. Completely unwind the power cord.
4. Take hold of the blender foot, place the
base unit on the blender foot and rotate
in a clockwise direction until both are
securely connected.
5. Connect the mains plug.
6. Take hold of the appliance with one
hand and immerse the blender foot.
Hold the receptacle firmly with your
other hand.
7. Press the On button. The appliance
remains switched on as long as the On
button is pressed.
8. Once the ingredients have reached the
desired consistency, release the On
button.
9. Unplug the mains plug.
Notes:
■ To prevent the ingredients from splash-
ing, fully immerse the blender blade in
the ingredients.
■ In the case of liquid foodstuffs, immerse
the blender foot and hold it at a slight
angle for better blending results and to
prevent the ingredients from sticking to
the base of the receptacle.
6

Care and daily cleaning

The appliance must be thoroughly cleaned
after each use.
W Risk of electric shock!
■ Disconnect the power cord from the
socket prior to cleaning.
■ Never immerse the base unit in liquids
and do not clean in the dishwasher.
Attention!
■ Do not use any cleaning agents
c ontaining alcohol or spirits.
■ Do not use any sharp, pointed or metal
objects.
■ Do not use abrasive cloths or cleaning
agents.
X Fig. C
1. Disconnect the base unit and the acces-
sory parts from one another.
2. Wipe the outside of the base unit with a
soft, damp cloth and dry off.
3. Clean the accessory parts with a deter-
gent solution and a soft cloth or sponge,
or place them in the dishwasher.
4. Dry the blender foot in an upright posi-
tion (blender blade face up) so that any
trapped water can run out.
Notes:
■ To make it easier to clean the blender
foot after use, place it in a receptable
containing clear water and briefly press
the On button a number of times.
■ Discolouration of the plastic parts may
occur when processing foods such as
red cabbage and carrots. This can be
removed with a few drops of cooking oil.