AGFA Drystar AXYS User Manual page 33

Proceed as follows to perform the mechanical modification:
1 Make sure that the printer is in 'Ready' mode.
2 Open the input tray you want to adapt and remove eventually loaded films.
3 Locate the correct tab position for the desired film format.
2852 A EN 20070205
17"
14"
12"
11"
8"
10"
14"
Note: Note that there is a screw to secure the position of the 10" and 14"
width format tabs. The format tabs positioned in the depth are not
provided with a screw.
10" and 14" width
tab
D AXYS
RYSTAR
33