Circuit Fuse Access:
10.
Remove the right side cover (page
11.
Open the fuse box cover (
RIGHT SIDE
(9)
(7) fuse box cover
12.
To check or replace a circuit fuse, pull
the old fuse out of its retaining clips.
Look for a burned wire inside the fuse.
If the fuse is blown (
a spare fuse (
9
lower.
75
7
).
(7)
(9) spare fuses
8
), replace it with
) of the same rating or
CIRCUIT FUSE
).
(8) blown fuse
13.
Close the fuse box covers.
14.
Install the right side cover.
If you do not have a replacement fuse
with the proper rating for the circuit,
install one with a lower rating.
Replacing a f use with one that has a
higher rating greatly increases the chance
of damage to the electrical system.
Taking Care of the Unexpected
If a Fuse Blows
(8)
167