Honda VTX1800R Owner's Manual page 167

If You Have a Flat Tire
8. If the clearances between each surface
of the brake disc and the brake bracket
( ) (not brake pads) are symmetrical, 10
follow next step.
If the clearances are not symmetrical,
loosen the left axle pinch bolts and pull
the left fork outward or push inward to
adjust the clearance. Then follow the
next step.
9. Tighten the axle pinch bolts on the right
fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
Visually check that the clearances
between each surface of the brake disc
and the brake bracket (not brake pads)
are symmetrical.
158
Taking Care of the Unexpected
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capability.
(9)
(9) brake disc
(10) brake bracket
(10)