To Install Sets And Cartridges In The I7Xx Range; Specific Configuration For Ip Sets; To Configure The Set; Installer Parameters - Aastra M720 Installation Manual

5 TO INSTALL SETS AND CARTRIDGES IN THE I7XX
RANGE
The i7xx range of IP sets includes:
• the i740* set,
• the i740N set,
• the i760* set,
• the i760E set,
• the i780* set,
• the IP cartridge to upgrade the M760 set to IP,
• the IP cartridge to upgrade the M780 set to IP,
Nota :
Sets followed by an asterisk do not appear any more in the catalogue from 2006.
5.1

Specific configuration for IP sets

5.1.1

To configure the set

Set configuration depends on:
• the set model: the i740 sets operate slightly differently from the i760/i760E and i780 sets in
terms of navigating through the menus,
• the network configuration: the set's start mode will be different according to the DHCP mode
selected.
5.1.2

Installer parameters

5.1.2.1 Introduction
This section describes the operating ergonomics to manually program the network and Ethernet
configuration parameters in i7xx range sets. It also describes the operating mode (read only) of
these parameters, connection to a directory number when in standby, set disconnection, and
displaying identification parameters.
Attention :The various labels for the parameters are only given in English
Installation Manual for digital sets - IP sets - SIP sets

To install sets and cartridges in the i7XX range 05/2008

AMT/PTD/TR/0001/3/7/EN
Page 5-1