Configuring Hierarchical Ingress Policing - Cisco ASR 9000 Series Configuration Manual

Configuring Modular Quality of Service Packet Classification on Cisco ASR 9000 Series Routers
Command or Action
Step 12
interface type instance
Example:
RP/0/RP1/CPU0:router(config)# interface
gigabitethernet 0/1/0/9
Step 13
service-policy {input | output} policy-map
Example:
RP/0/RSP0/CPU0:router(config-if)#
service-policy output policy1
Step 14
end
or
commit
Example:
RP/0/RSP0/CPU0:router(config-if)# end
or
RP/0/RSP0/CPU0:router(config-if)# commit
Step 15
show policy-map interface type instance
[input | output]
Example:
RP/0/RSP0/CPU0:router# show policy-map
interface gigabitethernet 0/1/0/9

Configuring Hierarchical Ingress Policing

The hierarchical ingress policing provides support at two levels:
•
•
OL-17239-01
D r a f t — C i s c o C o n f i d e n t i a l
Parent level
Child level
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
How to Configure Modular QoS Packet Classification on Cisco ASR 9000 Series Routers
Purpose
Enters interface configuration mode and configures an
interface.
Attaches a policy map to an input or output interface to be
used as the service policy for that interface.
• In this example, the traffic policy evaluates all traffic
leaving that interface.
Saves configuration changes.
When you issue the end command, the system prompts
•
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
– Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
–
returns the router to EXEC mode without
committing the configuration changes.
Entering cancel leaves the router in the current
–
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
•
changes to the running configuration file and remain
within the configuration session.
(Optional) Displays policy configuration information for all
classes configured for all service policies on the specified
interface.
QC-25