Casio UP-250 Technical Manual page 134

7. Insert the connectors you connected in step 6 into the slit in the auto-cutter cover. Insert the
cable wires of the auto-cutter into the other slit in the auto-cutter cover.
The other slit
8. While aligning the dowel, install the auto-cutter cover, and secure it with the screw. Arrange
the cable wires so that they come through the cut portion shown in the illustration.
CBS-tite (M3x5)
(0.59 to 0.78 N • m (6 to 8 kgf • cm)]
Auto-cutter cover
Slit
Cut portion
— 125 —
Auto-cutter cover