Wheels; Wheel Selection; Aluminum Wheel Precautions; When Replacing Wheels - Lexus IS250 2009 Service Manual

Table of Contents

Advertisement

4-3. Do-it-yourself maintenance

Wheels

If a wheel is bent, cracked or heavily corroded, it should be replaced. Oth-
erwise, the tire may separate from the wheel or cause loss of handling con-
trol.

Wheel selection

n
When replacing wheels, care should be taken to ensure that they
are equivalent to those removed in load capacity, diameter, rim
width, and offset.
Replacement wheels are available at your Lexus dealer.
Lexus does not recommend using:
l Wheels of different sizes or types
l Used wheels
l Bent wheels that have been straightened

Aluminum wheel precautions

n
l Use only Lexus wheel nuts and wrenches designed for use with
your aluminum wheels.
l When rotating, repairing or changing your tires, check that the
wheel nuts are still tight after driving 1000 miles (1600 km).
l Be careful not to damage the aluminum wheels when using tire
chains.
l Use only Lexus genuine balance weights or equivalent and a
plastic or rubber hammer when balancing your wheels.

When replacing wheels

n
The wheels of your Lexus are equipped with tire pressure warning valves and trans-
mitters that allow the tire pressure warning system to provide advanced warning in
the event of a loss in tire inflation pressure. Whenever wheels are replaced, the tire
pressure warning valves and transmitters must be installed. ( P. 327)
340

Advertisement

Table of Contents
loading

Table of Contents