Table of Contents
Advertisement
52 Pausing Playback
DVD
AUDIO CD
Pausing Playback
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
1
During disc playback, press the DVD button, then press the
PAUSE button on the remote control. Playback will pause and
the sound will be muted.
PAUSE
2
Press the PLAY button to resume playback.
PLAY
DVD
Memory On:
Resuming playback from the point
where playback stopped
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
1
Press the DVD button, then press the STOP button during
disc playback. Playback will stop, and STOP will appear at the top
right corner of the TV screen. In a few seconds, MEMO ON
(Memory On) will appear in the top left corner of the TV screen.
STOP
2
Press the PLAY button. Playback will resume from the
point where playback stopped last.
PLAY
MEMO ON
Pausing Playback...
POWER
TIMER SET
DVD/VCR
VCR/TV
OUTPUT
MEMORY
1
DVD
PLAY
REW
STOP
1
2
3
4
5
6
7
8
9
+10
SPEED
0
SEARCH MODE
DISPLAY
CLEAR
TIME SEARCH
STATUS/EXIT
Memory On...
POWER
TIMER SET
DVD/VCR
VCR/TV
OUTPUT
MEMORY
DVD
2
PLAY
REW
STOP
Helpful Hints
• Memory On can be erased by
pressing the STOP button a second
time while playback is stopped.
MEMO OFF will appear briefly at
the top left corner of the TV screen.
• Memory On is not available with
Audio CDs.
• The DVD/VCR will switch to VCR
mode automatically if disc playback
is paused or stopped for 30 min-
utes. This helps avoid the possible
burning of a still image into the TV
picture tube. Details are on page
77.
• To see the on-screen display mes-
sages, such as PLAY, STOP, or
PAUSE, set OSD MESSAGE to ON.
Details are on page 74.
VCR
2
F.FWD
PAUSE
1
SLOW
A B
REPEAT
VCR
1
F.FWD
Advertisement
Table of Contents
