Product Overview; Product Dimensions - Chauvet EPIX Strip IP Quick Reference Manual

Product Overview

Data/Power In

Product Dimensions

7.04 in
178.9 mm
Power
This product is powered by an ÉPIX Drive 2000 IP. Refer to the ÉPIX Drive 2000 IP User Manual for detailed instructions
on how to connect this product to power.
Power Linking
You can link up to 10 ÉPIX Strip IP products to each port of an ÉPIX Drive 2000 IP. Never exceed this number.
• Use ONLY IP65 4-pin XLR cables with the ÉPIX Strip IP. For our CHAUVET Professional line of
IP65 4-pin XLR cables, go to https://www.chauvetprofessional.com/accessories.
• To eliminate wear and improve its lifespan, during periods of non-use completely disconnect
the ÉPIX Drive 2000 IP from power via breaker or by unplugging it.
ÉPIX Strip IP QRG Rev. 2
QUICK REFERENCE GUIDE
Mounting Bracket
Bracket Position Adjustment Knobs
(used to align end to end on truss)
Filter
39.37 in
1000 mm
5.04 in
128 mm
3.15 in
80 mm
2.05 in
52 mm
Data/Power Out
Interlocking
Hardware
Fastening Knob/
Safety Loop
1.42 in
36 mm
3.27 in
83 mm
EN
1.33 in
34 mm
3.46 in
88 mm
2