Combo Devices; Punchthrough - Philips SRU8010 Owner's Manual

Advanced Settings, cont.
You can also change the device type by pressing the key on
screen (1) next to the device that you are editing the code for.
Pressing this key repeatedly cycles through all available
device types.
Programming Combo Device Codes
Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR,
etc.) will require you to set up two different Mode keys to
control both parts of the Combo device. For example, if you
have a TV/DVD Combo, you might need to set up one code
under the TV key to control the TV part AND a separate code
(under any other Mode key) to control the DVD part. Other
Combo devices have one code that will control both parts of
the device. See separate code list.
To set up a combo device, press the HOME key, then select
Setup, then select Advanced then Device Codes, as described
on previous page.

Punchthrough

This lets you set up how various keys on the remote operate in
various modes. For example you might want the Volume Up/
Down and Mute keys to ALWAYS operate your TV, no matter
what mode the remote is in. Or you might want the Play, Stop,
Pause REW, FF, and Record keys to ALWAYS operate your
VCR no matter what mode the remote is in.
Press the HOME key, then select Setup, then select Advanced,
then Punchthrough.
Then select the device you want to set up
Punchthrough for. E.G., TV.
35