and ceiling. The wall and ceiling must be strong enough to take
the weight of the hood.
o Do not tile, grout or silicone this appliance to the wall. This
appliance is designed to be surface mounted only.
Installing your cooker hood
IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE
INSTALLING YOUR COOKER HOOD WHETHER TO US E
IT IN EXTRACTION MODE OR RECIRCULATION MOD E.
PLEASE TURN TO PAGE 22 NOW TO UNDERSTAND
THE DIFFERENCES BETWEEN THESE TWO MODES.
o The cooker hood should not be exposed to a direct heat source
from the cooking device underneath it, i.e. a naked flame from a
gas burner or heat from electric hob zones without a pan on
them.
o We recommend that at least two people install this hood.
o The lights on this appliance should only be used during operation
of the cooker hood. They should not be left on permanently and
used as a lighting source.
IMPORTANT: YOUR COOKER HOOD SHOULD BE CONNECTED TO
YOUR MAINS SUPPLY AFTER THE REST OF THE INSTALLATION
PROCESS HAS BEEN COMPLETED.
16