Fitting The Carbon Filters - Baumatic BRC60SS User Manual

Fitting the carbon filters

If the appliance is being used to be used in recirculation mode then it
is necessary to fit carbon filters (ST1). This will help to absorb unpleasant
odours caused by cooking.
o Repeat this process for the second carbon filter. You need to
place a carbon filter at either end of the motor.
o Refit the grease filters.
o The carbon filters should be replaced every three months or if
they show signs of damage.
IMPORTANT: BEFORE ATTEMPTING TO FIT OR
REMOVE THE CARBON FILTERS, YOU MUST
ENSURE THAT YOU HAVE DISCONNECTED THE
COOKER HOOD FROM YOUR MAINS SUPPLY.
1) Remove the grease filters.
3) Turn the carbon filter anticlockwise, until you feel
it click into place.
2) Hook the carbon filter over
the pins that are located at the
end of the motor.
13