G1 Bracket Removal; F1 Board Removal; H1 Board Removal; Removal Of N Board Shield - Sony KD-32DX100U Service Manual

2-8. G1 Bracket Removal

To remove the G1 Bracket release the four clips (two on each
side of the bracket) and carefully lift away from the chassis.

2-10. H1 Board Removal

Remove the H1 bracket by removing the screws indicated.
Release the two clips circled and ease the bracket out of its slot
in the beznet.
Clips
To remove the H1 board release the two clips circled and ease
the board gently away from the support bracket.
Note : Removal of the H3 Board follows the same procedure.
Clips
Clips Screws

2-9. F1 Board Removal

Screw
Remove the F1 bracket by removing the screw indicated and
sliding the bracket away from the beznet.
To remove the F1 board release the two clips circled and ease
the board gently away from the support bracket.

2-11. Removal of N Board Shield

Screw
To remove the N Board shield, release the two fixing screws
and lift the shield vertically until it is clear of the chassis.
- 16 -
Clips