Roland rubix 22 Reference Manual page 25

Mac OS X MIDI Settings
Here's how to configure the MIDI settings for Mac OS X.
1.
In the Mac OS X Finder, open the
folder and then the [Utilities]
[Audio MIDI
double-click
2.
[Show MIDI Window]
Click
3.
[Rubix22]
Confirm that
appears in the "MIDI Studio"
MIDI Setup"
dialog box.
If [Rubix22] (or Rubix24, Rubix44) does not appear or if it is grayed
out, it means that the Rubix is not being detected properly.
[Rescan MIDI]
In this case, click the
off and then on again.
4.
Click the [Add Device]
One [new external device]
5.
[new external device]
Click the added
click the [Show Info]
6.
Enter "Rubix" in the
click the [Apply] button.
[Applications]
folder, and then
Setup].
[Window]
in the menu.
(or Rubix24, Rubix44)
window or the
icon. Also, try turning the Rubix
icon once.
icon will appear.
icon and then
icon.
[Device Name] field and then
7.
Using your mouse, drag and connect the
buttons (which represent the input/output ports of
each device) of the existing
added [Rubix]
in the figure.
"Audio
8.
Click the
The [Test Setup]
MEMO
If you have a sound module connected to the Rubix's MIDI
OUT connector, a fairly loud sound will be heard when you
perform the next step. Reduce the volume of your sound
module before continuing.
9.
Click the Rubix22's
A confirmation sound is played from the sound module.
10.
Click the
[Test Setup]
The
11.
Close the
MIDI Setup"
[Rubix22]
so that they are connected as shown
4
3
9
7
[Test Setup]
icon.
icon turns on (blue).
[ I ]
button.
[Test Setup] icon.
icon turns off (gray).
"MIDI Studio" window or the
window.
Troubleshooting
[ I ] [H]
and the newly
5 8, 10
New Device
"Audio
25