Table of Contents
Advertisement
Philips Semiconductors
Universal asynchronous receiver/transmitter (UART)
Table 6. Baud Rates Extended
CSR[7:4]
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
NOTE:
Each read on address H'2' will toggle the baud rate test mode. When in the BRG test mode, the baud rates change as shown to the left. This
change affects all receivers and transmitters on the DUART. See "Extended baud rates for SCN2681, SCN68681, SCC2691, SCC2692,
SCC68681 and SCC2698B" in application notes elsewhere in this publication.
The test mode at address H'A' changes all transmitters and receivers to the 1x mode and connects the output ports to some internal nodes.
Receiver Reset in the Normal Mode (Receiver Enabled)
Reset can be accomplished easily by issuing a receiver software or hardware reset followed by a receiver enable. All receiver data,
status and programming will be preserved and available before reset. The reset will NOT affect the programming.
Receiver Reset in the Wake-Up Mode (MR1[4:3] = 11)
Reset can also be accomplished easily by first exiting the wake-up mode (MR1[4:3] = 00 or 01 or 10), then issuing a receiver software or
hardware reset followed by a wake-up re-entry (MR1[4:3] = 11). All receiver data, status and programming will be preserved and
available before reset. The reset will NOT affect other programming.
The reason for this is the receiver is partially enabled when the parity bits are at '11'. Thus the receiver disable and reset is bypassed by
the partial enabling of the receiver.
2006 Aug 04
Normal BRG
ACR[7] = 0
ACR[7] = 1
50
110
110
134.5
134.5
200
150
300
300
600
600
1,200
1,200
1,050
2,000
2,400
2,400
4,800
4,800
7,200
1,800
9,600
9,600
38.4K
19.2K
Timer
Timer
I/O2 – 16X
I/O2 – 16X
I/O2 – 1X
I/O2 – 1X
ACR[7] = 0
75
4,800
880
1,076
19.2K
28.8K
57.6K
115.2K
1,050
57.6K
4,800
57.6K
9,600
38.4K
Timer
I/O2 – 16X
I/O2 – 1X
20
Product data sheet
SCC2691
BRG Test
ACR[7] = 1
7,200
880
1,076
14.4K
28.8K
57.6K
115.2K
2,000
57.6K
4,800
14.4K
9,600
19.2K
Timer
I/O2 – 16X
I/O2 – 1X
SD00097
Advertisement
Table of Contents
