Subaru EyeSight Owner's Manual page 61

Lane Keep Assist
■ Canceling Lane Departure Prevention Function
●
Cancellation by the operation of a driver (In case no beep sounds)
The following operation cancels Lane Departure Prevention Function.
If the function is canceled,
play area.
• Press the
Either of the following operations temporarily cancels the Lane Departure Prevention Func-
tion.
While temporarily canceling the function,
white and the lane indicator is turned off.
• Depressing the brake pedal
• Operating the turn signal lever
• When the system determines that the driver operates the steering wheel to make a lane
change.
• Turning on the hazard warning flasher switch
●
Automatic cancellation by the system (An audible beep will sound.)
Under the following conditions, a beep sounds and the Lane Departure Prevention Function
is temporarily canceled.
While the function is temporarily canceled,
white and the lane indicator turns to gray.
Also, the Adaptive Cruise Control cancellation
message is displayed on the screen.
• When the system cannot detect the lane.
• The windshield wiper operates at a high
speed.
• The
vehicle
approximately 34 MPH (55 km/h) or is more
than approximately 93 MPH (150 km/h).
• The Vehicle Dynamics Control or the
Traction Control Function is activated.
• Either
the driver's
passenger's door or the rear door is open.
• The seatbelt of driver's seat is unfastened.
• The select lever is shifted to a position other than
• Parking brake is applied.
60
and the lane indicator are turned off on the EyeSight dis-
(Lane Keep Assist) switch.
speed is less
door, the
on the EyeSight display area illuminates in
on the EyeSight display area illuminates in
than
front
D M
or position.
(White)
S02420