RC136/17 RC136/17 Directions for Use Need Help? Call us! Philips representatives are ready to help you with any questions about your new product. We can guide you through Connections, First-time Setup, or any of the Features. We want you to start enjoying your...
Page 2
Congratulations on your purchase, and welcome to the “family!” Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.
VCR/DVD Functions ..10 Introduction The RC136/17 is an accessory to the Philips satellite receivers, model DSX5500 and DSX5540. It will provide remote control of the satellite receiver using RF in addition to IR signals, that allows for convenient place- ment of the equipment without the need for line-of-sight access.
18. Heat – The product should be situated away from heat sources such as radiators, heat regis- ters, stoves, or other products that produce heat. Philips is a registered trademark of Koninklijke Philips Electronics, NV.
(1) 4/30/03 3:41 PM Page 5 Package Contents User Manual Infrared (IR) Universal with RF for the Satellite Receiver* PHILIPS IR Emitter RF Receiver AC Adapter *The Remote Control uses 3 AAA batteries (not supplied).
LED showing when the satellite receiver is powered on. Remove the backing on the IR emitter supplied with the RC136/17, and affix to the bezel in front of the IR sensor as shown in the illustration above.
rc1364101 (1) 4/30/03 3:41 PM Remote Control Set-Up Preparing Your Remote Control Battery Installation 1. Remove the battery compartment cover. Insert three batteries (type LR6/AAA - 1.5 V) not supplied. 2. Position them in the battery com- partment, as shown in the diagram. 3.
PROGRAM GUIDE” and the “Guide Menu”. TV INPUT [ - ] Confirms a selection. CH+ / CH- Displays the next or previous PHILIPS channel. While in the guide or menu, allows you to page up and down. DIRECTV INTERACTIVE™ powered by WINK Communications...
Press to turn TV on or off. POWER NEWS KIDS SPORTS SMARTSURF CH+ / CH- MENU INFO GUIDE Change channel up or down. PAGE+ PAGE- Allows direct number MUTE BACK entry for tuning to a channel. TV INPUT [ - ] PHILIPS tions of...
Press and hold to scan forward. PLAY TV INPUT [ - ] Press to play a tape or disc. PAUSE Press to pause a tape or PHILIPS disc. CH+ / CH- (VCR only) Change channel up or down.
(1) 4/30/03 3:41 PM Programming the Universal Remote Control Manually Setting the Remote to Operate a TV, VCR or DVD Player Your remote control may already operate your TV, VCR, or DVD player. If the remote control does not operate your TV, VCR, or DVD player, follow the steps below. These instructions guide you through setting the remote control to operate your TV.
(1) 4/30/03 3:41 PM Programming the Universal Remote Control (cont’d) Automatic Search To automatically program your remote control to operate your TV, VCR, or DVD Player, follow the steps below. For a VCR or DVD Player, follow the same steps but press the VCR or DVD button at step 1.
No other warranties are expressed or implied, including any implied warranties of merchantabili- ty or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential dam- ages, howsoever incurred, even if notified of the possibility of such damages.