Table of Contents
Advertisement
Refrigerator features
ROLLER TRAC* SPILLCLEAN*
NOTE: Shelves are shipped upside down. Use special care to remove
shelves.
To remove shelves from the shipping position:
1. Grasp front of upper shelf with one hand and use other hand to
remove packing material from shelf area.
2. Lower front of upper shelf until shelf hooks can be removed from
slots in shelf supports on the refrigerator wall. Pull shelf forward to
remove.
3. Flip shelf over.
4. Insert rear shelf hooks into slots in shelf supports.
5. Tilt front of shelf up until rear hooks drop into slots
6. Lower front of shelf. Check that shelf is securely in position.
The shelves in your refrigerator are adjustable to match your
individual storage needs.
Storing similar food items together in your refrigerator and adjusting
the shelves to fit different heights of food items will make finding the
exact item you want easier and cut down the amount of time the
door is open.
Some shelves have rollers which allow you to roll the shelf out for
easier access to foods stored on the rear of the shelf.
NOTE: Glass shelves are heavy. Handle them carefully.
To roll shelf out, carefully pull front of shelf toward you.
To roll shelf in, push shelf in until it stops.
To remove a shelf from the metal frame:
1. Pull shelf out to the stop.
2. Tilt front of the shelf up and pull it out a little further.
3. Lift shelf up so that the roller moves through the slot in the frame.
Replace the shelf in the reverse order.
To remove a shelf frame:
1. Tilt up front of the shelf frame and lift it at the back.
2. Pull shelf frame straight out.
To replace a shelf frame:
1. Guide the rear shelf hooks into the slots in shelf supports on the
back of the refrigerator wall.
2. Tilt front of the shelf frame up until the rear hooks drop into the
slots.
3. Lower front of the shelf into position.
12
Refrigerator shelves
Shipping position
(shelf upside down)
Advertisement
Table of Contents
