Key Eject Lock (On Some Models); Refrigerator Features - Whirlpool WSR57R18DM02 User Manual

Table of Contents

Advertisement

Door Ajar Alarm (on some models)
The Door Ajar alarm lets you know when the refrigerator door
has been open for 5 minutes or longer and the cooling is turned
on. This alarm feature will sound an alert tone that will repeat
every 2 minutes. Close the door to turn off the tone. The feature
is reset and will reactivate when the door is again left open for 5
minutes.
NOTE: To mute the alert tone while keeping the door open,
such as while cleaning the inside of the refrigerator, press TEMP
SETTING on the control panel. The alert tone will be temporarily
turned off.

Key Eject Lock (on some models)

To lock or unlock the refrigerator, you must hold the key in the
lock while turning. The lock is spring loaded, so the key cannot
be left in the lock.
If the key is lost, contact your dealer for a replacement. Always
give the model and serial number of your refrigerator when
requesting a replacement key.
NOTE: Keep the key out of the reach of children. Do not keep
the key close to the refrigerator.

Refrigerator Features

Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
Refrigerator Shelves
Store similar foods together and adjust the shelves to fit different
heights. This reduces the time the refrigerator door is open and
saves energy.
To Remove and Replace a Shelf:
1. Remove the shelf by lifting straight up and pulling the shelf
out.
2. Replace the shelf by lowering the shelf onto the supports on
the side wall.
Crisper Drawers
To Remove and Replace a Drawer:
1. Slide drawer straight out to the stop. Lift the front of the
drawer and slide it out the rest of the way.
2. Replace a drawer by sliding it back in, fully past the stop.
Crisper Cover
To Remove the Crisper(s) Cover:
1. Remove crisper(s). Hold the glass, insert firmly with one
hand, and press up in the center of the glass insert until it
rises above the plastic frame. Slowly slide the glass insert
forward to remove.
2. Lift the cover frame and remove it.
To Replace Crisper Cover:
1. Fit the back of the cover frame into the supports on the side
walls of the refrigerator. Lower the front of the cover frame
into place.
2. Slide the rear of the glass insert into the cover frame and
lower the front into place.
Crisper Humidity Control (on some models)
You can adjust the amount of humidity in the moisture-sealed
crisper using the settings between "+" and "-".
"-" (open) lets moist air out of the crisper for best storage of
fruits and vegetables with skins.
Fruit: Wash, let dry, and store in refrigerator in plastic bag
in crisper. Do not wash or hull berries until they are ready to
use. Sort and keep berries in original container in crisper.
Vegetables with skins: Place in plastic bag or plastic
container and store in crisper.
"+" (closed) keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
Leafy vegetables: Wash in cold water, drain, and trim or tear
off bruised and discolored areas. Place in plastic bag or
plastic container and store in crisper.
Door Bin
To Remove and Replace the Bin:
1. Remove the bin by tipping the front of the bin forward and
sliding out.
2. Replace the bin by sliding it in above the desired support
and tilting it back into place.
9

Advertisement

Table of Contents
loading

Table of Contents