Battery Indicator; Shutting Down - Panasonic CF-18 Series Operating Instructions Manual

Display (continued)
The external display no
longer displays properly
During simultaneous dis-
play, the screen of the exter-
nal display becomes disor-
dered
For British Gas model, add information in the attached file "battery_pack_BG".

Battery Indicator

The red indicator lights.
The red indicator blinks
The orange indicator blinks
The green indicator blinks
The battery indicator blinks
green and orange alternately
Reference Manual
The Reference Manual is
not displayed

Shutting down

Windows cannot be shut
down or restarted
"This program is not re-
sponding" is displayed
when shutting down or log-
ging off
When an external display is used that is incompatible with the power saving modes of the
computer, the display may not function correctly when the computer enters the power sav-
ing mode. In such cases, turn off the power to the external display.
Try changing the display by pressing Fn + F3 .
If you continue to experience problems, try changing the display in the following menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics]
The battery level is very low (the charge is less than approx. 9% capacity).
Connect the AC adaptor. You can use the computer when the indicator light is orange. If you
do not have an AC adaptor, save your data and power off your computer. After replacing the
battery pack with a fully charged one, turn your computer on.
Quickly save your data and power off your computer. Remove the battery pack and discon-
nect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support. The battery pack or recharg-
ing function may be defective.
Battery cannot be recharged temporarily because the internal temperature of the battery pack
is outside of the acceptable temperature range for recharging. Once the allowable range
requirement is satisfied, charging begins automatically. Your computer can be used normally
in this state.
In high temperature mode, the battery pack is discharging to a level of 80%* in normal
temperature mode. (
Do not remove the battery pack while the battery indicator is blinking green.
* A level of 80% in normal temperature mode is displayed as [100%] in high temperature mode.
Warming up the system to prevent hard disk drive malfunctions at low temperature. Leave
your computer as is. Once the allowable temperature range requirement is satisfied, your
computer will start automatically.
Is Acrobat Reader installed?
If Acrobat Reader is not installed, run [c:\util\reader\acroreader51_enu_full.exe] in [start] -
[Run] to reinstall the program. When installing the program, do not change the installation
destination folder. If the destination folder is changed, the Reference Manual cannot be
opened from the [start] menu.
If a USB device is connected, try removing it.
This message appears periodically; for example, when using a Wireless LAN. If the mes-
sage appears, select [End Now]. Delete the check mark for [Show the tray icon] in the
following menu.
[start] - [All Programs] - [Intel Network Adapters] - [Intel(R) PROSet]
"Battery Power")
25