Connection - Omron NX1P2 series User Manual

3 Configuration Units
3-7-2

Connection

With an NX1P2 CPU Unit, you can connect the Sysmac Studio online in the following ways.
Configuration
 Connection with EtherNet/IP
• 1:1 Connection
Sysmac Studio
EtherNet/IP
• A direct connection is made from the
Sysmac Studio. The IP address and
connection device do not need to be
specified.
• You can make the connection
whether or not a switching hub is
used.
• Support for Auto-MDI enables the use
of cross cables or straight cables if a
direct connection is made.
3 - 34
• 1:N Connection
Sysmac Studio
EtherNet/IP
Directly specify the IP address of the remote device.
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)