Philips intelligent remote control User Manual page 60

4 Edit the macro.
To move or delete a command:
Delete or an arrow button.
To record more commands:
commands. When you return to the macro, the new commands automatically
appear at the end of the macro.
The Go command, if any, is always at the end of the macro list.
NOTE
5 Add delays, if needed.
Tap the Delay button to insert a new delay at the end of the macro.
Delay
Use + and – to increase the length of the delay. Use the arrow buttons to move
the delay to the right place.
6 When you're done, tap the Left button (labeled CLOSE ) to close the
macro and return to Use mode.
A message asks you if you want to save your changes. Tap the Save Macro
button to save your changes and return to Use mode.
58 Chapter 4—Creating Macros
Tap the command to select it, then tap
Go to the device controls and enter the
Decrease or
increase the length
of the delay.
Move the delay up in
the command list.