When the power window does not close normally
■
If the jam protection function is operating abnormally and a window cannot be
closed, perform the following operations using the power window switch on the rel-
evant door.
After stopping the vehicle, the window can be closed with the door closed by
●
holding the power window switch in the one-touch closing position while the
ignition switch is turned to the "ON" position.
If the window still cannot be closed even by carrying out the operation
●
explained above, initialize the function by performing the following procedure.
Hold the power window switch in the one-touch closing position. Con-
STEP
1
tinue holding the switch for a further 6 seconds after the window has
closed.
Hold the power window switch in the one-touch opening position. Con-
STEP
2
tinue holding the switch for a further 2 seconds after the window has
opened completely.
Hold the power window switch in the one-touch closing position once
STEP
3
again. Continue holding the switch for a further 2 seconds after the win-
dow has closed.
If you release the switch while the window is moving, start again from the beginning.
If the window continues to close but then re-open slightly even after performing the
above procedure correctly, have the vehicle inspected by your Lexus dealer.
Customization that can be configured at your Lexus dealer
■
Settings of the linked key and wireless remote control operation can be changed.
(Customizable features P. 383)
1-4. Opening and closing the windows
1
47