Lexus LFA Owner's Manual page 276

4-3. Do-it-yourself maintenance
If you press the tire pressure warning reset switch accidentally
■
If initialization is performed, adjust the tire inflation pressure to the specified level
and initialize the tire pressure warning system again.
When the initialization of the tire pressure warning system has failed
■
Initialization can be completed in a few minutes. However, in the following cases,
the settings have not been recorded and the system will not operate properly. If
repeated attempts to record tire inflation pressure settings are unsuccessful, have
the vehicle inspected by your Lexus dealer.
When operating the tire pressure warning reset switch, the tire pressure warning
●
light does not flash 3 times.
After carrying out the initialization procedure, the tire pressure warning light
●
flashes for 1 minute then stays on after driving for 20 minutes.
Tire pressure warning system certification
■
MODEL/FCC IDs:
Transmitter: PAXPMV107J
Receiver: HYQ13BDK
For vehicles sold in the U.S.A.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
For vehicles sold in Canada
NOTE:
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device.
274