Lexus LFA Owner's Manual page 340

5-2. Steps to take in an emergency
Check the specified inflation pressure. (P. 366)
STEP 14
STEP 15
STEP 16
After completely filling the tire with air, disconnect the hose from
STEP 17
the tire valve and the compressor power plug from the power
outlet.
To spread the liquid sealant evenly in the tire, immediately drive
STEP 18
for about 3 miles (5 km) or 10 minutes.
Drive cautiously at a moderate speed, avoiding sudden starts, sudden
braking, and abrupt steering maneuvers.
STEP 19
338
Turn the compressor switch "ON"
and fill the tire with air until the
specified inflation pressure is
reached.
Turn the switch "OFF" when the
pressure gauge connected to the
hose reads the specified pressure.
If the inflation pressure is not
attained within 8 minutes, emer-
gency repair is not possible due to
severe damage. Contact your
Lexus dealer.
After driving about 3 miles (5 km)
or 10 minutes, stop your vehicle in
a safe place and reconnect the
compressor.