Adjusting Meat Pan Temperature - Whirlpool ED26SS Use & Care Manual

Other combinations of Check Point Display symbols:
The following Display Symbol combinations show the represented conditions if they were in both
compartments. If an over-temperature condition occurred in just one compartment, only that com-
partment's indicator light would appear
Power is off.
Freezer TOO WARM; time to CHECK COIL.
Refrigerator and/or freezer TOO WARM for 6 or more
hours: time to CHECK COIL.
DOOR (or doors] OPEN; refrigerator and/or freezer
TOO WARM for 6 or more hours
DOOR (or doors] OPEN; refrigerator and/or freezer
TOO WARM for 6 or more hours; time to CHECK COIL.
DOOR [or doors] OPEN; time to CHECK COIL.
Adjusting meat pan temperature.. .
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator. This helps keep the
meat pan colder than the rest
of the refrigerator.
Set the control beside the
meat pan to raise or lower the
temperature.
Use Control to Adjust
Meat Pan Temperatures
DOOR (or doors) OPEN for 4 or more hours, time to
DOOR [or doors) OPEN: refrigerator and freezer
WARM.
DOOR (or doors] OPEN; refrigerator and freezer
WARM; time to CHECK COIL.
TOO
TOO
Refrigerator and freezer were TOO WARM; time to
CHECK COIL.
DOOR [or doors) OPEN; refrigerator and freezer were
TOO WARM.
DOOR [or doors] OPEN; refrigerator and freezer were
TOO WARM; time to CHECK COIL.
Adjusting crisper
Humidity Control.. .
You can control the amount of humrdity in the mois-
ture-sealed crrsper.
The control can be adjusted to any setting be-
tween LO and HI. I
LO (open) lets morst
air out of crisper for
best storage of fruits
and vegetables
with skins.
HI (closed) keeps
moist air in the cris-
pei- for best storage
of fresh leafy vege-
tables
Ifmoisture builds up in the
crisper, move the control
to a lower setting.