Service Ports - ATEN CL5708I User Manual

CL5708I / CL5716I User Manual
IP Installer
The IP Installer is an external Windows-based utility for assigning IP addresses
to the KVM over IP switch.
Click one of the radio buttons to select Enable, View Only, or Disable for the
IP Installer utility. See IP Installer, page 219, for IP Installer details.
Note: 1. If you select View Only, you will be able to see the KVM over IP
switch in the IP Installer's Device List, but you will not be able to
change the IP address.
2. For security, we strongly recommend that you set this to View Only
or Disable after each use.

Service Ports

As a security measure, if a firewall is being used, the Administrator can specify
the port numbers that the firewall will allow. If a port other than the default is
used, users must specify the port number as part of the IP address when they
log in. If an invalid port number (or no port number) is specified, the KVM over
IP switch will not be found. An explanation of the fields is given in the table
below:
Field
Program
HTTP
HTTPS
Note: 1. Valid entries for all of the Service Ports are from 1–65535.
2. Service ports cannot have the same value. You must set a different
value for each one.
3. If there is no firewall (on an Intranet, for example), it doesn't matter
what these numbers are set to, since they have no effect.
134
This is the port number for connecting with the WinClient
ActiveX Viewer, WinClient AP, Java Client Viewer, or Java Client
AP. The default is 9000.
The port number for a browser login. The default is 80.
The port number for a secure browser login. The default is 443.
Explanation