Rs232 Faceplate Port - GE G60 Instruction Manual
Generator management relay
Hide thumbs
Also See for G60:
- Instruction manual (780 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (722 pages)
Table of Contents
Advertisement
3 HARDWARE
3.2 WIRING
3.2.7 RS232 FACEPLATE PORT
A 9-pin RS232C serial port is located on the relay's faceplate for programming with a portable (personal) computer. All that
is required to use this interface is a personal computer running the EnerVista UR Setup software provided with the relay.
Cabling for the RS232 port is shown in the following figure for both 9 pin and 25 pin connectors.
The baud rate for this port is fixed at 19200 bps.
NOTE
3
Figure 3–17: RS232 FACEPLATE PORT CONNECTION
GE Multilin
G60 Generator Management Relay
3-17
Advertisement
Table of Contents
