Memory Function - Mercedes-Benz S-Class Coupe Operator's Manual

The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior lighting
is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. You can store this position.
Using reverse gear
Memory button M
:
Adjustment button
;
Button for the front-passenger side exterior
=
mirror
Button for the driver's side exterior mirror
?
Turn the SmartKey to position 2 in the ignition
X
lock ( page 136).
Y
Press button =.
X
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the default setting parking posi-
tion.
Use button ; to adjust the exterior mirror to
X
a position that allows you to see the rear
wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position
after approximately 10 seconds.

Memory function

Using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M :. The reverse gear must not
be engaged during the process.
Turn the SmartKey to position 2 in the ignition
X
lock ( page 136).
Y
Press button =.
X
Use button ; to adjust the exterior mirror to
X
a position that allows you to see the rear
wheel and the curb.
Press memory button M : and one of the
X
arrows on button ; within three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat the
X
steps.
Calling up a stored parking position set-
ting
Turn the SmartKey to position 2 in the ignition
X
lock ( page 136).
Y
Adjust the exterior mirror on the front-
X
passenger side using button =.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have disengaged
R
reverse gear
if you press button ? for the exterior mirror
R
on the driver's side
Memory function
Important safety notes
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
113
Z